Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
When using the software RIP Epson Edge Print
supplied with the printer, downloaded the EMX file
from Epson Edge Print.
"Using Epson Edge Print (Windows only)" on
U
page 30
When using a commercial software RIP, download the
EMX file using Epson Edge Dashboard.
"Using Epson Edge Dashboard" on page 30
U
Notes When Handling
Media
If the following points are not observed when
handling media, small amounts of dust and lint may
stick to the media surface and cause ink drops in the
print results or cause the nozzles to clog.
Do not place exposed media directly on the floor.
Media should be rewound and inserted in its original
packaging for storage.
Do not carry media with the media surface pressed
against clothing.
Handle paper in its individual packaging until just
before loading the paper in the printer.
User's Guide
Basic Operations
Notes on Loading Media
Do not rub your hands along the edges of the
media. The edges of the media are sharp and can
cause injury.
Load the media just before printing.
The rollers may crease media left in the printer. The
media may also become wavy or curled, causing jams
or resulting in the media coming into contact with the
print head.
Do not load media if the right and left edges are
uneven.
If media is loaded and the right and left edges of the
roll are uneven, media feeding problems may cause
the media to move around during printing. Either
rewind to align the edges or use a roll without any
issues.
Media that cannot be used
Do not use media that is folded, wrinkled, scuffed,
torn, or dirty. The media could rise up and contact the
printheads and damage them.
Do not use paper that is frayed at the ends of the roll,
wrinkled, torn, and so on, as shown in the following
image.
35
Caution:
Advertisement
Table of Contents
