Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
❏ Take-up roll core that is the same width as the
media
❏ Commercially available adhesive tape
A
Set the Auto switch on the Auto Take-up Reel
Unit to off.
B
Release the left-side lock lever.
C
Move the roll core holder until it is outside the
width of the media.
D
Release the right-side lock lever.
User's Guide
Basic Operations
E
F
G
H
39
Align the right-side roll core holder with the
edge of the media.
Move the lock lever on the roll core holder to
the lock position to secure the roll core holder.
Insert the roll core onto the roll core holder.
Make sure the roll core holder is inserted into
the roll core and that the roll core and the edges
of the media are aligned.
Advertisement
Table of Contents
