Panasonic WV-CS564 Operating Instructions Manual page 37

Special Menu (SPECIAL)
This menu lets you adjust and set up the picture quality to meet your
requirements.
• Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 16 for details on displaying
the SET UP on the monitor screen.)
• Move the cursor to SPECIAL and press the F2 button of the WV-
CU550B. The special menu appears on the monitor screen.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for 2 seconds or more.)
(1) Chroma Level Setting (CHROMA GAIN)
1. Move the cursor to CHROMA GAIN. The "I" cursor is highlighted.
2. While observing the vectorscope or color video monitor, adjust
the chroma level by using the joystick. The "I" cursor moves to the
right or left.
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for 2 seconds or more.)
(2) Aperture Level Setting (AP GAIN)
1. Move the cursor to AP GAIN. The "I" cursor is highlighted.
2. While observing the video monitor, adjust the aperture level with
the joystick. The "I" cursor moves to the right (sharp) or left (soft).
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for 2 seconds or more.)
(3) Pedestal Level Setting (PEDESTAL)
1. Move the cursor to PEDESTAL. The "I" cursor is highlighted.
2. While observing the waveform monitor/oscilloscope or video mon-
itor, adjust the pedestal level (black level) by moving the joystick.
The "I" cursor moves to the right (high, bright) or left (low, dark).
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for 2 seconds or more.)
(4) Chroma Phase (Hue) Setting (HUE)
1. Move the cursor to HUE The "I" cursor is highlighted.
2. While observing the vector scope or a color video monitor, adjust
the chroma phase by moving the joystick. The "I" cursor moves to
the right or left.
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for 2 seconds or more.)
38
Camera setting menu
** SET UP **
CAMERA ID ON
ALC/MANUAL ALC
SHUTTER OFF
AGC ON(MID)
SYNC INT
WHITE BAL ATW
AF MODE MANUAL S
EL-ZOOM ON
IMAGE HOLD OFF
RET SPECIAL
Special menu
** SPECIAL **
CHROMA GAIN •••• ••••
|
AP GAIN •••• | ••••
PEDESTAL • •••••••
|
HUE •••• ••••
|
- +
REFRESH PUSH SW
CAMERA RESET PUSH SW
RET
** SPECIAL **
CHROMA GAIN •••• ••••
|
AP GAIN •••• ••••
|
PEDESTAL • •••••••
|
HUE •••• | ••••
- +
REFRESH PUSH SW
CAMERA RESET PUSH SW
RET
** SPECIAL **
CHROMA GAIN •••• ••••
|
AP GAIN •••• | ••••
PEDESTAL • •••••••
|
HUE •••• ••••
|
- +
REFRESH PUSH SW
CAMERA RESET PUSH SW
RET
** SPECIAL **
CHROMA GAIN •••• ••••
|
AP GAIN •••• ••••
|
PEDESTAL • •••••••
|
HUE •••• | ••••
- +
REFRESH PUSH SW
CAMERA RESET PUSH SW
RET