Auto Pan Key Setting (Auto Pan Key); Local/Remote Setting (Local/Remote) - Panasonic WV-CS564 Operating Instructions Manual

Auto Pan Key Setting
(AUTO PAN KEY)
This is used for assigning one of the following auto functions to the
AUTO key on the controller. Pressing the AUTO key activates the
assigned function after this setting.
• Move the cursor to AUTO PAN KEY and select an auto function by
moving the joystick to the right or left.
The factory default setting is AUTO PAN.
Mode changes as follows:
AUTO PAN: assigns auto panning function to the key.
SEQ: assigns the sequence function to the key.
SORT: assigns the sort function to the key.
PATROL: assigns the patrol play function to the key.
Note: Auto pan LED on the controller does not light if a function
other than the auto pan function is assigned. The auto pan
function does not stop with the AUTO PAN key.
Local/Remote Setting
(LOCAL/REMOTE)
• Move the cursor to LOCAL/REMOTE, and move the joystick to the
right or left.
The factory default setting is LOCAL.
You can toggle between LOCAL and REMOTE.
Note: The REMOTE does not work when the WV-RM70, WV-
CU360, WV-CU161, WJ-FS616 or WV-CU550 series is con-
nected. Make sure that LOCAL is selected in this case.
25
AUTO PAN SEQ
PATROL
SORT
Setup menu
** SET UP MENU **
PRESET 1
MAP
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
AUTO PAN KEY AUTO PAN
LOCAL/REMOTE LOCAL
PATROL
STOP
CLEANING
OFF
CAMERA
RS485 SET UP
Setup menu
** SET UP MENU **
PRESET 1
MAP
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
AUTO PAN KEY AUTO PAN
LOCAL/REMOTE LOCAL
PATROL
STOP
CLEANING
OFF
CAMERA
RS485 SET UP