Table of Contents
Advertisement
3. After editing the camera identification characters, follow the steps
below to set the position of the CAMERA ID on the monitor screen.
3-1 Move the cursor to POSI, and press the CAM (SET) key to display
the ID position menu.
3-2 Use the joystick to decide the position of the CAMERA ID on the
monitor screen. Press the MON (ESC) key to fix the position, and
return to the character editing menu.
Notes:
• When you want the pointer to move to a specific character in the
editing area, select a new character, and press the CAM (SET)
key. This function allows you to edit or correct a specific charac-
ter.
• When you want a blank space in the CAMERA ID, move the char-
acter cursor to SPACE, and press the CAM (SET) key.
• When you want to erase all characters in the editing area, move
the cursor to RESET and press the CAM (SET) key.
• The positioning of the CAMERA ID stops at the edges of the
screen.
• The CAMERA ID moves faster when the joystick is kept at the
right or left for one second or more.
• To return to SET UP for setting other items, move the cursor to
RET, and press the CAM (SET) key.
29
** SET UP **
CAMERA ID
ON
ALC/MANUAL
ALC
SHUTTER
OFF
AGC
ON(MID)
SYNC
INT
WHITE BAL
ATW
AF MODE
MANUAL S
EL-ZOOM
ON
IMAGE HOLD
OFF
RET
SPECIAL
CAM1
Advertisement
Table of Contents
