Turning Off The Power - Panasonic PT-LB50NTU Operating Instructions Manual

Turning off the power

# ・ $
Press the POWER button.
#
BThe "POWER OFF" confirmation
screen will be displayed.
Press the POWER button
$
again.
BThe lamp unit will switch off and the
picture will stop being projected.
(The POWER button on the projector will illuminate orange while the
cooling fan is still operating.)
NOTE:
BPress any button other than the POWER button to cancel the "POWER
OFF" screen.
BThe "POWER OFF" screen will disappear in 10 seconds.
%
Disconnect the power cord after the POWER
button on the projector illuminates red.
BDisconnect the power cord plug from the wall outlet first, and then
disconnect the connector from the AC IN socket.
NOTE:
B You can also turn off the power by holding down the POWER button for
at least 0.5 seconds.
28-E
NGLISH
%
AC IN socket
# ・ $
Connector