Connections; Connecting To Computer - Panasonic PT-LB50NTU Operating Instructions Manual

Connections

Notes on connections
B Read the instruction manual for each peripheral device carefully before
connecting it.
B Turn off the power supply for all peripheral devices before making any
connections.
B If the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.
B If there is a lot of jitter in the video signal, the projected image may flicker.
In such cases, it will be necessary to connect a TBC (time base corrector).
B Refer to the list on page 68 for details on compatible signals which can be
input to the projector.
B Only one audio system circuit is available for each of the PC AUDIO IN
and AUDIO IN L-R connectors, so if you change the audio input source,
you will need to remove and insert the appropriate plugs.

Connecting to computer

DIN 8-pin
(male)
Serial adapter
(ET-ADSER : sold
separately)
Monitor
Refer to the accessory CD-ROM for details on the wireless network
that can be used for controlling the projector with a personal
computer. (PT-LB50NTU only)
Computer for
control use
Computer
RGB signal cable
(accessory)
RGB signal cable
(accessory)
Computer
Audio system
E -21
NGLISH