Adjusting The Position; Realtime Keystone - Panasonic PT-LB50NTU Operating Instructions Manual

Adjusting the position

# Press the MENU button to display the menu screen.
$ Select the "POSITION" menu from the main menu, and then press the
ENTER button.
% Press the F or G button to select an item. (When RGB signals are
being input, first press the AUTO SETUP button to initiate automatic
positioning. If the optimum setting is not obtained when "AUTO
SETUP" is carried out, adjust the items manually.)
& Press the I or H button to adjust the value or change the setting. For
items with selective setting or a bar scale, the individual adjustment
screen will be displayed.
When an S-VIDEO/VIDEO signal is
being input
When an RGB/YP
being input
When WIRELESS is selected
44-E
NGLISH
P signal is
B R

REALTIME KEYSTONE

This projector detects its own
degree of tilt and corrects the
keystone distortion automatically.
ON
"REALTIME KEYSTONE" is
enabled.
OFF
"REALTIME KEYSTONE" is
disabled.
KEYSTONE
This projector detects its own
degree of tilt and corrects the
keystone distortion automatically
("REALTIME KEYSTONE").
However, keystone distortion may
still affect the images in some cases
(e.g. when the projector is tilted
slightly and the tilt is corrected
slowly by hand or when the screen
itself is tilted). In such cases, set
"REALTIME KEYSTONE" to "OFF"
and correct the vertical keystone
distortion manually.