Starting To Use; Turning On The Power; Turning Off The Power - Panasonic PT-LC75E Operating Instructions Manual

Starting to use

Turning on the power

Please ensure that all preparations have been completed before turning on
the power. (Refer to pages 19 – 23.)
# Remove the lens cover.
$ Connect the accessory power cord.
% Press the MAIN POWER switch to
the "|" side to turn on the power.
The power indicator on the projector
will illuminate red.
& Press the POWER button.
The power indicator on the projector
will flash green. After a short period,
the indicator will illuminate green, and
a picture will be projected.
' Turn on the power of all connected
devices.
Start the Play function a device such
as a DVD player.
( Press the input select (INPUT, RGB,
VIDEO) button to select the input
signal.
The input signal selected will change
as shown at below each time an input
select button is pressed.
INPUT
S-VIDEO
VIDEO
RGB2
RGB1
) While pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector.
24-E
NGLISH
All manuals and user guides at all-guides.com
POWER AUTO SETUP
STANDBY(R)
ON(G)
MENU
POWER AUTO SETUP
STANDBY(R)
ON(G)
MENU
VIDEO RGB
S-VIDEO
VIDEO
$ %
POWER
INPUT
VIDEO RGB
INPUT
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
ENTER
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
POWER
INPUT
VIDEO RGB
INPUT
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
ENTER
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
RGB2
RGB1
* Press the AUTO SETUP b
initiate automatic position
If keystone distortion has n
corrected to the optimum le
out keystone correction as
on page 31.
+ Turn the focus/zoom ring
the projected image focus
Turning off the powe
# Hold down the POWER bu
POWER button twice to tu
The lamp unit will switch off
power indicator on the proje
$ Wait until the power indic
the cooling fan stops).
Do not in any way cut powe
operating. Be careful not to
projector, unplug the power
switches such as tabletop p
% Press the MAIN POWER s
NOTE:
B After the power is turned off
down. If you turn the power
down, the lamp unit may no
automatically after a short p
the projector will flash orang
B When the projector is in sta
projector is illuminated red),
power, even when the cooli
B If the MAIN POWER switch
being used, the lamp unit m
turned back on. In such cas
automatically after a short p
the projector will flash green
B A tinkling sound may be hea
this is not a sign of a malfun