Correcting The Image Position Automatically - Panasonic PT-LB50NTU Operating Instructions Manual

Correcting the image position
automatically (AUTO SETUP)
This projector can adjust the position of the image and the settings for "DOT
CLOCK" and "CLOCK PHASE" when RGB signals are being input.
Projector control
panel
NOTE:
B"SIGNAL SEARCH" will also be carried out. (When "SIGNAL SEARCH"
is set to "ON", refer to page 51 for details.)
B If the dot clock frequency is 100 MHz or higher, "DOT CLOCK", and
"CLOCK PHASE" will not be adjusted automatically. Refer to page 45 for
details.
B If the edges of the projected image are indistinct, or if a dark picture is
being projected, the automatic setup processing may stop automatically
before it is complete. If this happens, project a different picture and then
press the AUTO SETUP button again.
Press the AUTO SETUP button while RGB
signals are being projected.
Screen
Projected
image
B Automatic positioning
will be carried out.
[
E
NGLISH
-31