Table of Contents
Advertisement
Turning on the power
Make sure that all peripheral devices are connected properly before
turning on the power.
&
$
&
Connect the accessory mains lead to the AC IN
#
socket.
BInsert the connector into the AC IN socket so that the shape of the
connector matches the shape of the socket. Then insert the mains
plug into the mains socket.
BThe POWER button on the projector will illuminate red.
Press the POWER button.
$
BThe POWER button on the projector will flash green. After a short
period, it will illuminate green, and the startup logo will be displayed.
If you would like the startup logo not to be displayed, set "STARTUP
LOGO" to "OFF". (Refer to page 49.)
%
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B A tinkling sound may be heard when the lamp unit is turned on, but this
is not a sign of a malfunction.
26-E
NGLISH
(
$
(
'
&
#
AC IN socket
Connector
)
*
'
Advertisement
Table of Contents
