Xerox 6110MFP/XN Service Documentation page 28

Table of Contents

Advertisement

Problem
Page skew
Page skew
Wrinkles or creases
Back of printouts
aredirty
Solid Color or
Black pages
A
Ensure that the paper is loaded properly.
Check the paper type and quality.
Ensure that the paper or other material is loaded correctly and the guides are not too
tight or too loose against the paper stack.
Ensure that the paper is loaded properly.
Check the paper type and quality. Both high temperature and high humidity can cause
paper curl.
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Ensure that the paper is loaded properly.
Check the paper type and quality.
Turn the stack of paper over in the paper tray. Also try rotating the paper 180° in the
tray.
Check for leaking toner. Clean the inside of the printer.
The toner cartridge may not be installed properly.
Remove the toner cartridge and reinsert.
The toner cartridge may be defective and need replacing. Install a new toner cartridge.
The printer may require repair. Contact a service representative.
Solution
Troubleshooting

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 61106110mfp/x6110mfp/bPhaser 6110mfp/s

Table of Contents