Listening To Voice Mail Messages - Panasonic KX-TG5230 Operating Instructions Manual

Listening to Voice Mail Messages

The unit will let you know that someone has left new voice mail for you:
(a) the VM indicator will flash on the base unit,
(b) "Voice Mail" will be displayed on the handset,
(c) " " will flash on the handset, and
V M
(d) the Ringer/Message Alert indicator on the handset will flash slowly if Message
Alert is turned on (p. 21) and the handset is not in use.
To listen to your voice mail message(s)
1
Press the soft key (
or [s].
• "Dial VM access#" is displayed and the
number is dialed (p. 51).
• If the handset beeps 3 times and "Store VM
access#" is displayed, a voice mail access
number is not stored. To store the number, see
page 51.
2
Follow the pre-recorded instructions.
3
When finished, press [OFF].
• After listening to your message(s), "
handset display
Base Unit
1
Press [VM].
• The unit is connected to the telephone line and dials the access number
(p. 51) in speakerphone mode.
• If the base unit beeps 3 times, a voice mail access number is not stored. To
store the number, see page 51.
2
Follow the pre-recorded instructions.
3
When finished, press [SP-PHONE].
For assistance, please call: 1-800-211-PANA(7262)
), then press [C]
V M
" stops flashing but remains on the
V M
Voice Mail Service
Handset Base Unit
Handset
Voice Mail
V M
53