Line Mode; Auto Talk; Auto Talk - Panasonic KX-TG5230 Operating Instructions Manual

Line Mode

Handset
The line mode is preset to "B" and generally should not be adjusted. If "
not displayed on the handset properly, the line mode selection is incorrect. Set line
mode to "A".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Set tel line" by pressing [d] or
[B], then press the soft key (
4
Scroll to "Set line mode" by pressing [d]
or [B], then press the soft key (
5
Select "A" or "B" by pressing [d] or [B].
6
Press the soft key (

Auto Talk

Handset
The Auto Talk feature allows you to answer calls by simply lifting the handset off the
base unit (or the charger, for accessory handset users, p. 3). You do not need to
press [C] or [s]. The factory preset is OFF.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Auto talk" by pressing [d] or
[B], then press the soft key (
4
Select "On" or "Off" by pressing [d] or [B].
5
Press the soft key (
• In order to view Caller ID information after you lift the handset to answer a call,
leave the Auto Talk feature turned off.
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
SELECT
).
SELECT
SELECT
), then press [OFF].
SAVE
SELECT
).
SELECT
), then press [OFF].
SAVE
Initial setting
).
Set tel line
Set line mode
).
Set line mode
:B
Initial setting
).

Auto talk

Auto talk
:Off
" is
IN USE
17