Removing And Replacing The Side Racks - Fisher & Paykel RDV2366NN User Manual

Removing and replacing the side racks

To remove side racks
1 Remove any shelves first. See section
'Positioning the shelves' for instructions.
3 Swing the bottom of the side rack up
towards the center of the oven until
it is almost horizontal.
To replace side racks
1 Supporting the side rack with your
hand from underneath, hold it almost
horizontally and locate the prongs
into the mounting slots.
42
CARE AND CLEANING
2 Gently pull down on the retaining wire
4 Slide the prongs at the top out of the
2 Ensure the prongs are fully inserted
Retaining wire
from underneath the lock stud.
The retaining wire will pop out.
M o
u n t
i n g
mounting slots.
into the slots, then lower the side rack
carefully and gently push the retaining
wire underneath the lock stud.
Lock stud
s l o t
s