Table of Contents
Advertisement
IMPORTANT
•
The mask area may move out of alignment when the JPEG/H.264 "Image capture mode" setting is
changed. Make sure to check the mask area after changing the "Image capture mode" setting.
•
The mask area may move out of alignment when "HD Extra optical zoom" is configured. Make sure to
check the mask area after configuring "HD Extra optical zoom".
Note
•
When the [Reset] button is clicked, masking for all the masked areas will be canceled.
8.5.3 Configure the settings relating to the preset positions
("Preset position" setup menu)
Click the [Setup>>] button of "Preset position" on the [Image/Position] tab of the "Image/Audio" page
(®page 58).
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the
currently displayed image on the [Image/Position] tab.
8 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions
71
Advertisement
Table of Contents
