Table of Contents
Advertisement
4 Transmit images onto an FTP server
4 Transmit images onto an FTP server
Images can be transmitted to an FTP server. By configuring the following settings, transmission of images
captured at an alarm occurrence or captured at a designated interval to an FTP server will become available.
IMPORTANT
•
When using this function, set the user name and the password to access the FTP server to restrict
users who can log into the FTP server.
4.1 Transmit an alarm image at an alarm occurrence
(Alarm image transmission)
An alarm image can be transmitted at an alarm occurrence to the FTP server. To transmit alarm images to an
FTP server, it is necessary to configure the settings in advance.
FTP server settings and settings relating to alarm image transmission can be configured in the "FTP" section
of the [Advanced] tab of the "Network" page. (®page 134) Settings can also be configured from the "Alarm
image FTP transmission" settings of "Camera action on alarm" on the [Alarm] tab of the "Alarm" page.
(®page 101)
Note
•
Depending on the network traffic, the number of the transmitted images may not reach the set number
of images to be transmitted.
•
When "On" is selected for both the alarm image transmission function and the FTP periodic image
transmission function, the alarm image transmission function will be given priority over the FTP periodic
image transmission function. Also, when "On" is selected for the "FTP transmission retry" FTP setting
(®page 135), alarm images will be retransmitted if there is an FTP transmission failure. Therefore, if
there is continuous retransmission due to network problems or other factors, periodic transmission will
not be performed.
4.2 Transmit images at a designated interval or
period (FTP periodic image transmission)
Images can be transmitted at a designated interval or period. To transmit images at a designated interval or
period, it is necessary to configure the settings in advance.
FTP server settings and settings relating to FTP periodic transmission image transmission can be configured
in the "FTP" section of the [Advanced] tab of the "Network" page. (®page 134)
Configure the schedule settings of the FTP periodic image transmission on the "Schedule" page.
(®page 177)
Note
•
Depending on the line speed or the traffic, images may not be transmitted at the designated interval.
•
When "On" is selected for both the alarm image transmission function and the FTP periodic image
transmission function, the alarm image transmission function will be given priority over the FTP periodic
image transmission function. Therefore, images may not be transmitted at the interval designated on
the "FTP periodic image transmission" setting.
30
Operating Instructions
Advertisement
Table of Contents
