Table of Contents
Advertisement
8 Configure the settings relating to images and audio [Image/Audio]
8 Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be
configured on this page.
The "Image/Audio" page has the [JPEG/H.264] tab, the [Cam. Function] tab, the [Image/Position] tab, and the
[Audio] tab.
8.1 Configure the settings relating to the image
capture mode [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (®page 32, page 34)
[Image capture mode]
Select an image capture mode from the following.
2 mega pixel [16:9](30fps mode)/2 mega pixel [16:9](60fps mode)/1.3 mega pixel [4:3](30fps mode)
•
Default: 2 mega pixel [16:9](30fps mode)
IMPORTANT
•
The positions of areas may move out of alignment when the "Image capture mode" setting is changed
when the following area settings are configured. Therefore we recommend that you configure each
area setting after configuring the "Image capture mode".
–
mask area (®page 68)
–
privacy zone (®page 85)
–
VMD area (®page 110)
–
VIQS area (®page 88)
Note
•
When "On" is selected for "VIQS" and the setting value for the aspect ratio is changed from "4:3" to
"16:9", make sure that the VIQS setting value does not exceed the maximum designated range.
46
Operating Instructions
Advertisement
Table of Contents
