Configure The Settings Relating To The Preset Positions ("Preset Position" Setup Menu) - Panasonic WV-X6531N Operating Instructions Manual

2 Settings
4.
Click the divided areas to be masked.
→
The clicked areas will be masked and will become white. To cancel masking, click the area again.
5.
Click the [End] button after completing masking areas.
→
The borders on the image displayed on the [Image/Position] tab will disappear.
IMPORTANT
•
The mask area may move out of alignment when "Image capture mode" of the [Image] tab is changed.
Make sure to check the mask area after changing the "Image capture mode" setting.
Note
•
When the [Reset] button is clicked, masking for all the masked areas will be canceled.
2.5.5.3 Configure the settings relating to the preset positions ("Preset
position" setup menu)
Click the [Setup>>] button of "Preset position" on the [Image/Position] tab of the "Image/Audio" page.
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the
currently displayed image on the [Image/Position] tab.
120 Operating Instructions