Table of Contents
Advertisement
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
B
:
VP101
VP101
•
When "16:9" is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from
the image of "4:3". Therefore even when "16:9" is selected for "Image adjust", the brightness of the
masked area will affect the image.
A
Note
•
When the [Reset] button is clicked, masking for all the masked areas will be canceled.
9.5.3 Configure the settings relating to the preset positions
("Preset position" setup menu) (BL-VT164W/BL-VT164)
Click the [Setup>>] button of "Preset position" on the [Image/Position] tab of the "Image/Audio" page
(®page 57).
It is possible to register, edit and delete the preset positions on this page.
When the brightness and zoom factor are adjusted, the adjustment will be applied immediately to the currently
displayed image on the [Image/Position] tab.
A
C
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)
A.
Image in the aspect ratio of "16:9"
B.
Areas where the image is not displayed when
"4:3" is selected for the aspect ratio
C.
Image in the aspect ratio of "4:3" (Being cut
out from the aspect ratio of "16:9")
A.
Image in the aspect ratio of "4:3"
B.
Areas where the image is not displayed when
B
"16:9" is selected for the aspect ratio
C.
Image in the aspect ratio of "16:9" (Being cut
out from the aspect ratio of 4:3)
C
Operating Instructions
65
Advertisement
Table of Contents
