Table of Contents
Advertisement
6.2 Cleaning the sensor
There are dampness sensors in the dryer that
detect whether the laundry is dry or not.
To clean the sensors:
•
Open the loading door of the dryer.
•
Allow the machine to cool down if it is still
hot due to the drying process.
•
Wipe the metal surfaces of the sensor
with a soft cloth, dampened with vinegar
and dry them.
Clean metal surfaces of the sensors
4 times a year.
C
Do not use metal tools when
cleaning metal surfaces of the
sensors.
A
Never use solvents, cleaning agents
or similar substances for cleaning
due to the risk of fire and explosion!
6.3 Cleaning the condenser
The hair and the fibre that are not collected
by the fibre filter accumulates on the metal
surface of the condenser behind the air
deflector. These fibres shall be cleaned
regularly.
If the condenser cleaning icon blinks, check
the metal surface. If there is any fibre, clean it.
It must be checked at least every 6 months.
Dryer / User Manual
Open the toe board by pulling its button.
Move the latches to open the air deflector lid.
Pull the brush to the left to remove it. You
can use the cleaning brush to clean filter,
condensing metal surface and accumulated
fibre on the door.
29 / EN
Advertisement
Table of Contents
