Homewhiz Function - Beko HPD24414W Owner's Manual

Front-loading dryer
Table of Contents

Advertisement

pressing the Start/Hold button.
You will need to tap on the 'Steam' option on
the screen to be able to activate the steam
function in Blend, Jeans, Cotton, Economic
Cotton, and Synthetic cycles. When you tap
this button, steam function will be activated,
and the cycle duration will change.
You may start the cycle by pressing the Start/
Hold button when you see the High displayed
and the steam function is activated.
If the steam tank is empty, High
C
icon will blink. It is required to dry
laundry in a cycle with the steam
function inactive to fill the tank.

5.14 HomeWhiz Function

Firstly, the homewhiz application should be
installed on your phone.
The detailed information regarding the
homewhiz application is available on https://
www.homewhiz.com/
Turn on the bluetooth on your phone.
Switch the program selection button to Off
mode.
Press the Dryness level and Remote Control
keys together for 3 seconds. 3-2-1 appears
on the screen during this time. Then the image
below appears on the screen.
Super
Extra
Lock
Normal
Damp
Buzzer
Select the product model to add from the
application Devices->Add Device->Cleaning
Devices->Dryer
Add the product stock number by selecting
Wifi and Bluetooth.
The surrounding Wifi networks appear on
the screen after selecting start to add, select
the network to add and enter the network
password.
The product screen is closed after the
installation is completed and in the application,
it is asked to select the room where the
Dryer / User Manual
High
Mid
Low
product will be added.
Using the remote connection:
Switch the product to Download program
mode, observe that the Wifi icon is illuminated
if the Wifi is turned on in the product.
If the Wifi is off and the icon is not illuminated,
press the remote control key for 3 seconds to
turn on the Wifi.
Press the remote control key to allow remote
control to the product while the Wifi is turne
on.
Super
Extra
Normal
Lock
Damp
Buzzer
The product can be controlled remotely by
entering the homewhiz application while the
remote control is active
The detailed information regarding the
homewhiz application is available on https://
www.homewhiz.com/
Deleting the product from network:
When the time delay and Wifi buttons are
pressed for 5 seconds while the product
is on, it counts down from 5 on the screen
and when the beep is heard, the product is
deleted from network and the Wifi is turned
off.
High
Mid
Low
25 / EN

Advertisement

Table of Contents
loading

Table of Contents