Table of Contents
Advertisement
Adding laundry after the drying
operation starts may cause the
dried laundry inside the drying
machine to mix with wet laundry
and leave the laundry damp at the
end of operation.
Adding or removing laundry
during drying may be repeated as
many times as you wish. But this
C
operation continuously interrupts
the drying operation, and thus
increases program duration and
energy consumption. So, it is
recommended to add laundry
before the program starts.
If a new program is selected by
turning the program selection
button while the drying machine is
in stand-by, the running program
terminates.
Do not touch the inner surface of
the drum while adding or removing
clothes during a continuing
program. The drum surface is hot.
5.10 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any reason
after the drying machine starts running, Pause
the program and turn the On/Off/Program
Selection button; the program terminates.
The inside of the drying machine
A
shall be extremely hot when you
cancel the program during machine
operation, so run the refreshing
program to allow it to cool down.
5.11 End of program
When the program ends, the LED's of End/
Wrinkle Prevention and Fibre Filter Cleaning
Warning on the program follow-up indicator
turn on. Loading door can be opened and
drying machine is ready for another operation.
Turn the On/Off/Program Selection button to
On/Off position in order to turn off the drying
machine.
24 / EN
If the Wrinkle Prevention mode
is active and the laundry is not
removed after the program is
completed, the wrinkle prevention
C
function activates for 2 hours to
prevent the laundry inside the
machine to get wrinkled. The
program tumbles the laundry with
10-minute intervals to prevent them
from wrinkling.
5.12 Odour feature
If your drying machine has odour feature, read
the ProScent manual to use this feature.
5.13 General Description
of Steam Programs
Steam cycles
You may use the steam function in cycles
that are marked with a blue / red line in your
machine panel. It is necessary to to use the
dryer grouping your clothes depending on
their types and thicknesses when you use
a cycle with the steam function active. Do
not dry wool, leather, or clothes that contain
metal parts in this cycle. Extra noise may be
generated during steam generation in steam
cycles. Depending on the type, amount of
laundry and the selected cycle, the result of
wrinkle release and odour removal processes
may differ. Upon completion of steam cycles,
laundry should be immediately extracted from
the machine and hung on a hanger.
Getting the machine ready
Before using steam programs for the first time
the steam tank needs to be filled. In the first
use, 1-3 drying cycles must be made using a
program other than the steam program.
How to activate the steam cycle:
When you turn on the machine and the rotate
the cycle navigator to the 'Ready to Wear' or
'Steam Refresh' cycles, the High icon located
on display will turn on.
High icon indicates that you can run the
drying cycle with a maximum load of 1.5
kg (6 pieces). To be able to dry 1 piece or 3
pieces of laundry, you need to tap the 'Steam'
option on the screen to make the required
adjustment in loading level settings.(Mid /
Low)
Once you have made the required
adjustments, you may start the cycle by
Dryer / User Manual
Advertisement
Table of Contents
