Maintenance And Cleaning; Loading Door Inner Surface - Beko HPD24414W Owner's Manual

6 Maintenance and cleaning

6.1 Loading Door Inner Surface

The hair and fibres that are separated from the
laundry during drying process is collected by
the Fibre Filter.
Fibres are formed during wearing
C
and washing clothes.
You can clean the filter slot with a
vacuum cleaner.
A
After each drying cycle, clean the
fibre filter and the inner surface of
the loading door.
To clean the fibre filter:
• Open the loading door.
• Hold the first part (inner filter) of the two
part fibre filter and remove it by pulling it
upwards.
• Collect the hair, fibres and cotton balls with
hand or with a soft cloth.
• Remove the second part (outer filter) by
pulling it upwards.
C
Ensure that hair, fibre and cotton
balls do not fall into the slot where
the filters are installed.
• Open both filters (top and bottom filters)
and to remove the lint with your hand, or
use cleaning brush at air routing cover. And
if necessary, use a vacuum cleaner to clean
filters.
Dryer / User Manual
27 / EN