Auxiliary Functions - Beko HPD24414W Owner's Manual

Allergy UK is the trademark of
the British Allergy Foundation.
The Seal of Approval has been
created to guide people
requesting an advice that the
product significantly reduces
the amount of the allergens in an
environment where allergic people are
present or the product restricts/reduces/
eliminates the allergens. The purpose is to
provide evidence that the products have
been scientifically tested or analysed to yield
measurable results.

5.5 Auxiliary functions

Dryness level
Dryness level
button is used for adjusting
to desired dryness. Program time may change
depending on the selection.
C
You can activate this function only
prior to start of program.
Wrinkle prevention
You can turn on and off the wrinkle prevention
function by pressing the wrinkle prevention
selection button. If you will not take the
laundry out immediately after the program has
completed, you may use Wrinkle prevention
function to prevent wrinkling of your laundry.
Audible warning
Drying machine makes an audible warning
when the program is completed. Press the
"Audible Warning" button if you do not want
audible warning. When you press the audible
warning button, the light goes off and it does
not sound when the program is completed.
C
You can select this function before
the program starts or after the
program starts.
Low temperature
You can activate this function only prior to
start of a program. You can activate this
function if you want to dry your laundry at a
lower temperature. The program duration will
be longer after it becomes activated.
Steam level
You can use this button to select the
steam level or activate the steam function.
This button can only be used in programs
22 / EN
!
supported by the steam function. You can
activate this function only prior to the start of a
program. The program duration will be longer
after it becomes activated.
End time
You can delay the end time of the program up
to 24 hours with end time function.
1.Open the loading door and place the
laundry.
2.Select the drying program.
3.Press the End Time selection button and set
the delay time you wish. End Time LED turns
on. (When pressed and hold the button, End
Time proceeds non-stop).
4.Press the Start / Stand-by button. End Time
countdown begins. The ":" sign in the middle
of displayed delay time flashes.
You can add or remove laundry
within end time. Displayed time is
C
the sum of normal drying time and
end time. End Time LED turns off at
the end of countdown, the drying
starts and the drying LED turns on.
Changing the end time
If you want to change the duration during the
countdown:
Pause the program and Turn the On/Off/
Program Selection button and cancel the
program. Select the desired program and
repeat the End Time selection.
Cancelling the end time function
If you want to cancel the end time countdown
and start the program immediately:
Pause the program and Turn the On/Off/
Program Selection button and cancel the
program. Select the desired program and
press the "Start/Pause" button.
Drum Light
You can turn on and off the drum light by
pressing this button. The light turns on when
the button is pressed and turns off after
certain time.
Dryer / User Manual