Homewhiz Function - Beko B5T64237WM User Manual

How to activate the steam cycle:
When you turn on the machine and the rotate
the cycle navigator to the 'Ready to Wear' or
'Steam Refresh' cycles, the indicator shown on
the image below will turn on.
This symbol indicates that you can run the
drying cycle with a maximum load of 1.5 kg (6
pieces). To be able to dry 1 piece or 3 pieces of
laundry, you need to tap the 'Steam' option on
the screen to make the required adjustment in
loading level settings.
3 Pieces 1Pieces
Once you have made the required adjustments,
you may start the cycle by pressing the Start/
Hold button.
You will need to tap on the 'Steam' option on
the screen to be able to activate the steam
function in Blend, Jeans, Cotton, Economic
Cotton, and Synthetic cycles. When you tap
this button, steam function will be activated, the
symbol shown below will be displayed and the
cycle duration will change.
You may start the cycle by pressing the
Start/Hold button when you see the
symbol displayed and the steam function is
activated.
If the steam tank is empty, the icon
shown below will blink. It is required
to dry laundry in a cycle with the
steam function inactive to fill the
tank.
Dryer / User Manual

6.14 HomeWhiz Function

Firstly, the homewhiz application should be
installed on your phone.
The detailed information regarding the
homewhiz application is available on https://
www.homewhiz.com/
Turn on the bluetooth on your phone.
Switch the product to off mode using the On/
Off switch.
Perform the following actions using the
application on your mobile device.
Devices->Add Device->Cleaning Devices-
>Dryer
Scan or type the product barcode into the app.
Continue with the installation according to the
app instructions on your mobile device.
Press the "On" and "Off" and Remote Control
buttons on your device simultaneously for 3
seconds according to the app instructions. The
screen displays 3-2-1 and the following image
appears.
The product screen is closed after the
installation is completed and in the application,
it is asked to select the room where the
product will be added.
Using the remote connection:
Switch the product to Download program
mode, observe that the Wifi icon is illuminated if
the Wifi is turned on in the product.
If the Wifi is off and the icon is not illuminated,
press the remote control key for 3 seconds to
turn on the Wifi.
Press the remote control key to allow remote
control to the product while the Wifi is turned
on.
25