Replacing The Feed Roller - Visioneer PATRIOT PD40-U User Manual

®
V P D40
ISIONEER ATRIOT
10. Lift the roller cover and carefully push it closed to lock it in place. Make sure everything is aligned properly
and the cover is fully closed. If the cover is not fully closed it will break during scanning and damage the
scanner.
11. Close the scanner when you're finished.
R F
EPLACING THE
The roller will wear out and is designed to be a user-replaceable part. A worn roller can cause documents to feed
in skewed at an angle, or multiple pages to feed at the same time. Before replacing the roller you should clean it
as excessive dust on the roller will make it appear worn and smooth. You cannot properly diagnose a worn roller
until you have cleaned it. You should generally replace the roller every 160,000 to 200,000 scans.
Replacement parts can be purchased from the Parts & Accessories page for your scanner at www.visioneer.com.
1. Open the Automatic Document Feeder cover.
26
R
EED OLLER
M
AINTENANCE
S U ' G
CANNER SER S UIDE