Table of Contents
Advertisement
R
R
EPLACING THE
OLLER
After extended use, the roller may wear out and may need to be
replaced. It is a user-replaceable part and can be reordered. See the
section, "Visioneer 9450 Scanner Parts List" on page 137 for the part
number.
Frequent paper jams are a symptom of a worn roller assembly. A worn
roller can cause documents to feed in skewed at an angle, or multiple
pages to feed at the same time. In both cases, paper jams may occur. A
worn roller should be replaced to avoid damage to the scanner's internal
parts.
To replace the roller assembly:
1. Open the ADF cover.
2. Squeeze the plastic clamp that holds the roller in place, and then
rotate the clamp forward until the locking tabs are free from the
ADF cover.
C
A
SSEMBLY
M
ARE AND
AINTENANCE
129
Advertisement
Table of Contents
