Screen Capture Setting (Auto File Erase) - JRC JMR-611 Instruction Manual

3.7.6 Screen Capture Setting (AUTO File Erase)

In the case that the capacity of flash memory card is full, this setting is to select whether the
system overwrites or not.
AUTO File Erase=Off : The system stops screen capture when the capacity is full.
AUTO File Erase=On : The system overwrites data when the capacity is full.
Procedures 1 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 1.Screen Capture Setting and press [ENTER] key.
2 Select 6.AUTO File Erase
3 Select 1.Off or 2.On and press [ENTER] key.
3.7 SCREEN CAPTURE
and press [ENTER] key.
3-49


3