JRC JMR-611 Instruction Manual page 97

[II] Discarding Navigation Data (Unload).
Procedures 1 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information
Select 5.File Operations
2 Select 4.Unload and press [ENTER] key.
Confirmation Window will appear.
3 Select 1.Yes and press [ENTER] key.
The saved navigation data will be discarded.
4 Press [ MENU] key.
Menu will be closed.
[III] Saving Navigation Data (Save).
Navigation data can be saved when navigation equipment is connected, or the own ship
position on the user map is entered in the manual mode.
Procedures 1 Insert a flash memory card into the card slot.
In the case of saving data to internal memory, a card is not necessary.
2 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information and press [ENTER] key.
Select 5.File Operations and press [ENTER] key.
3 Select 1.Select Card Slot and press [ENTER] key.
4 Select the slot number which you inserted a flash memory card or
3.Internal and press [ENTER] key.
5 Select 5.Save and press [ENTER] key.
The Input File Name menu will appear.
6 Enter the file name to be saved.
Up to 10 characters can be entered.
After the data has been entered, Confirmation Window will appear.
7 Press [ MENU] key.
Menu will be closed.
3.6 DISPLAY USER MAP
and press [ENTER] key.
and press [ENTER] key.
3-43


3