JRC JMR-611 Instruction Manual page 84

Plotting a Mark / Line Make with Latitude and Longitude
Procedures 1
2 Select 2.Make with L/L and press [ENTER] key.
3 Set the color with 2.Color .
4 Select Mark or Line with 5.New Line/Mark Input and press ENTER.
5 Select 1.Type and select the kind of mark or line to be created.
6 Select 3.L/L to input the latitude / longitude and press [ENTER]
7 Select 4.Enter and press [ENTER] key.
8 Press [ MENU] key.
Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information and press [ENTER] key.
Select 1.Edit User Map and press [ENTER] key.
The Make with L/L menu will appear.
If 5.New Line Input
If 5.New Mark Input
In the case to make a line,
To add a line, select
To edit newly, select O---- .
key.
To create another mark or line, repeat the above procedures.
Menu will be closed.
is displayed, the kinds in
is displayed, the kinds in
--O-- .
3-30
1.Type will be marks.
1.Type will be lines.