Screen Capture Setting (Auto Capture Interval); Screen Capture Setting (Auto File Erase) - JRC JMA-610 Series Instruction Manual

Procedures 1 Press [MENU] key.
Select
Select
2 Select

3.7.5 SCREEN CAPTURE SETTING (AUTO Capture Interval)

This setting is to determine the interval in Auot-1 or Auto-2 mode.
Procedures 1 Press [MENU] key.
Select
Select
2 Select
3 Input interval time and press [ENTER] key.
Auto-1 mode : 1-999min
Auto-2 mode : 15-999sec

3.7.6 SCREEN CAPTURE SETTING (AUTO File Erase)

In the case that the capacity of flash memory card is full, this setting is to select whether the
system overwrites or not.
AUTO File Erase=Off : The system stops screen capture when the capacity is full.
AUTO File Erase=On : The system overwrites data when the capacity is full.
Procedures 1 Press [MENU] key.
Select
Select
2 Select
3 Select
8.Next and press [ENTER] key.
1.Screen Capture Setting and press [ENTER] key.
4.Capture Mode and press [ENTER] key.
8.Next and press [ENTER] key.
1.Screen Capture Setting and press [ENTER] key.
5.AUTO Capture Interval
8.Next and press [ENTER] key.
1.Screen Capture Setting and press [ENTER] key.
6.AUTO File Erase and press [ENTER] key.
1.Off or 2.On and press [ENTER] key.
3-49
3.7 SCREEN CAPTURE
and press [ENTER] key.
3