JRC JMR-611 Instruction Manual page 93

Correcting the Mark or Vertex of a Line (Insert / Move Vertex)
A mark or line is corrected for the user map.
Procedures 1 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information and press [ENTER] key.
Select 1.Edit User Map and press [ENTER] key.
Select 5.Insert/Move Vertex and press [ENTER] key.
2 Put the cursor on the mark or vertex of a line, and press [ENTER]
key.
When the mark or vertex of a line to be corrected is selected, the cross-cursor mark will
appear.
3 Move the cross-cursor mark to the destination, and press [ENTER]
key.
The vertex of the selected mark or vertex of a line is moved to the destination.
To correct another mark or vertex of a line, repeat procedures 2 and 3.
4 Press [ MENU] key.
Menu will be closed.
(Example)
Original vertex
New vertex
3-39
3.6 DISPLAY USER MAP


3