Care And Maintenance - Pride Mobility Zero Turn 10 Owner's Manual

V I I I . C A R E A N D M A I N T E N A N C E
Your scooter requires a minimal amount of care and maintenance. If you do not feel confi dent in your ability to
perform the maintenance listed below, you may schedule inspection and maintenance at your authorized Provider.
The following areas require periodic inspection and/or care and maintenance.
SOLID TIRE SAFETY CHECK
Regularly inspect your scooter's tires for signs of damage or wear.
WHEEL REPLACEMENT – SOLID TIRES
If your scooter is equipped with solid tire inserts and you have a damaged or worn tire, the entire wheel must be
replaced. Contact your authorized Provider for information regarding replacement wheels for your scooter.
WARNING! Wheels on your scooter should only be serviced/replaced by a qualifi ed technician.
WARNING! Be sure that the key is removed from the key switch and the scooter is not in
freewheel mode before performing this procedure.
Follow these easy steps for a quick and safe repair for
solid tires:
1. Remove the key from the key switch.
2. Elevate the side of the scooter of which you are removing
the tire. Place wooden blocks under the frame to elevate
the scooter.
3. Remove the wheel cap, drive wheel nut and washer from
the axle. See fi gure 29.
4. Pull the wheel off of the axle.
5. Slide the new wheel onto the axle. Make sure the the axle
key is in the axle slot.
WARNING! Ensure that the axle key is
properly installed into the axle slot when
mounting the wheel. If not installed securely,
the braking system is disengaged which
may cause personal injury and/or product
damage may result.
6. Reinstall the washer and drive wheel nut onto the axle
and tighten.
WARNING! Make sure that both the nut
and washer are reinstalled and tightened
properly.
7. Reinstall the wheel cap.
8. Remove the blocks from beneath the scooter.
36
IDENTIFICATION KEY
1. WHEEL CAP
2. DRIVE NUT WHEEL
3. DRIVE WHEEL WASHER
4. WHEEL
5. AXLE KEY
6. AXLE SLOT
4
2
1 3
Figure 29. Wheel Removal
5
6
Mid-size Scooter Series