Sylvania SP400 - Round Cloth Bluetooth Speaker Manual

Advertisement

Sylvania SP400 - Round Cloth Bluetooth Speaker Manual

Please read these instructions thoroughly before use and retain for future reference

Your Round Cloth Bluetooth Speaker

In the box

Carefully remove your Round Cloth Speaker from the box. Inside the box you will find:

  • 1 x Round Cloth Speaker
  • 1 x Line in cable
  • Instruction Manual
  • 1 x USB Charging Cable

Front view

Front view

  1. Indicator light
  2. Decrease volume/Previous track
    Press the button to switch the previous track
    Hold the button to decrease the volume.
  3. Play / Pause / Answer calls / End calls / Refused calls / Redial last calls/Mode
    When receiving a call, long press the button to refuse a call. A short press will play / pause / answer / end a call. Press the button twice to redial the last call.
  4. Increase volume / Next track
    Press the button to switch to the next track.
    Hold the button to increase the volume.
  5. Speaker

Side view

Side view

  1. Standing leg
  2. Power ON / OFF button
    Switch the power ON/OFF button to On or Off.
  3. LINE IN
    Used to connect the round cloth speaker to devices without Bluetooth.
  4. USB Charging port
    Connect the USB charging cord (included) to the DC 5V charging port of the speaker and insert the other end into a port on your computer or similar power source.

Quick Set Up

Pairing With a Bluetooth Device

  1. Switch the On/Off button until you will be hear 'Bluetooth mode, Pairing'. The LED indicator will show a blue flashing light.
  2. Using your Bluetooth phone or tablet, turn on Bluetooth and search for Bluetooth Devices.
  3. In the available list you will see 'Sylvania SP400'. Select this device. If you are asked for a pass code, enter 0000.
  4. When successfully paired, the LED indicator will stop flashing and you will hear 'Connected'.

Playing Your Music

When your phone or tablet is paired to the Round Cloth Bluetooth Speaker, use your music app to playback your music.

Using the Aux-In Connection

  1. If your music device doesn't have Bluetooth, you can use the line-In connection.
  2. Connect the line in cable provided to the round cloth speaker and connect the other end to your music device.
  3. Select your music on your music device and select 'Play'.

Note: When a line in cable is connected your Round Cloth Speaker will automatically disconnect from your Bluetooth device.

Troubleshooting

Problem What to do
I can't pair the round cloth Speaker with my Bluetooth device.
  • Turn the round cloth Speaker On.
  • Make sure that the line in cable is not connected.
  • Make sure that the Indicator LED is flashing blue.
  • If it is not flashing blue, it is already paired to another device. Un-pair that device and try again.
I can't hear my music.
  • Turn the round cloth Speaker On.
  • Using the volume controls on your music device, turn the volume up.
I can't turn my round cloth Speaker On.
  • Make sure that the round cloth Speaker is galvanical.
  • Press the On/Off button for three seconds to turn it On.
My music device keeps on disconnecting from the round cloth Speaker.
  • Make sure that the round cloth Speaker is galvanical.
  • If the line in cable is connected, remove it.
  • Make sure that your music device is not further than 10 metres away from the speaker.

Technical Specifications

Bluetooth Version: V 5.0
Speaker Output: 2x5W
Play Time: Up to 2 hours
Charge Voltage: DC 5V (USB)
Bluetooth Range: 10 Meters
Built-In Rechargeable Li-ion Battery: 3.7V, 1800mAh

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sylvania SP400 - Round Cloth Bluetooth Speaker Manual

Advertisement

Need Assistance?

Do you have a question about the SP400 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents