Sylvania SP740-C - Light Up Bluetooth Speaker Manual

DEAR CUSTOMER
In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference.

NOTE
This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

Packing list

Upon opening the package, please check for the following items:
1 x Speaker
1 x USB charging cable
1 x Instruction manual
1 x Microphone

Do's and Don'ts

• Do not play music at excessive levels as damage to hearing and/or equipment may result.
• Do not use outdoors in wet or in damp surroundings.

Product overview

1. Power/VOLUME -&+
2. Charging Indicator
   RED = Charging
   Light off = Fully Charged
3. DC interface (5V)
4. MODE/LED ON (Long press to turn on/off light; Lightly press to enter into selection for Bluetooth, FM Radio, AUX Input, USB/TF Card)
5. Previous track & TWS (Wireless Bluetooth Connection: under Bluetooth mode, press TWS button for around 3 seconds to pairing another TWS speaker;
   Under FM mode, lightly press Play/Pause&TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
6. Play/Pause/REC
7. Next track
8. TF/USB input
9. AUX input
10. MIC input

POWER SOURCE

1. Please charge the unit at least 4 hours before first time using.
2. Twist the dial clockwise/anticlockwise to switch on/off the unit.

CHARGE THE BATTERY

When the battery is charging, the CHARGE STATUS lights shows on the LED display is red. After the battery has fully charged, the light turns off.

1. Connect the USB charge cable to the DC5V interface of the speaker firmly.
2. When the battery is fully charged, please disconnect the USB charge cable from the speaker.
3. The speaker works normally when charging.

POWER/VOLUME

Twist the dial clockwise/anticlockwise to increase/decrease the mus volume.

PREVIOUS/NEXT BUTTON

Under playing status, press PREVIOUS/NEXT button to get back to a previous or next song.

PAUSE/PLAY BUTTON

To stop playing the current track, please press PAUSE/PLAY button on the control panel. Press it once again to continue playing.

MODE/LED ON

Long press to turn on/off light.
Lightly press to enter into playing mode selection (Bluetooth, FM Radio, AUX Input, USB/TF Card).

AUX IN JACK

1. Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc, then select AUX by pressing the MODE/LED ON button on the control panel.
2. Play from an external audio device.

TWS: (True Wireless Speaker)

It needs two speakers to make a TWS. When you had two speakers, you can make a TWS as below steps:

1. Don't connect to this speaker with Bluetooth devices.
2. Turn on both speakers and press the mode button to change to Bluetooth mode.
3. Press and hold the TWS button for both speakers, the display shows 't on' that means pairing mode, wait for a few minutes that will be connected together. And it will have a tone - coming out during connected together.
4. Turn the Bluetooth devices to search the Bluetooth name "Syl SP740" and tap to connect it. It will have a tone coming out from this speaker after connected successfully.
5. Now you can play the music form your Bluetooth devices.

MIC IN JACK

Plug in microphone directly for playing.

USB/TF JACK

Insert USB/TF card directly for playing.

FM FUNCTION

Lightly press MODE/LED ON button to switch to FM mode.

Press PLAY/PAUSE

Short press PLAY/PAUSE button on control panel for automatic searching and saving the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station.

Bluetooth

Short press MODE/LED ON button on control panel to select Bluetooth mode.
Simultaneously turn on the Bluetooth setting on your phone, tablet or any other Bluetooth enabled audio device and select "Syl SP740"(no need to match code), the unit and device will then connected via Bluetooth. Press the "NEXT SONG" and "PREVIOUS SONG" button on the control panel to select the song, press " PLAY/PAUSE" button to control the playing status.

Playing recording function

1. After the portable speaker is turned on, insert the TF Card or U disk to the TF slot or USB port, press the Mode button to the Bluetooth mode, connect it with your Bluetooth device and paly the music, long press the REC button around 3 seconds, you will here a prompt voice "ding" means the TF card/USB is starting recording, long press the play/pause button for 3 seconds again and you will here prompt voice"ding ding", that means stop recording.
2. If you want to play this recording sound, press the Mode button to the USB or TF card mode, press the next button to find out this song and play it.

Note:

1. When your TF card and U disk insert to the speaker at same time, it will record to your U disk when recording.
2. The recording only works in Bluetooth mode, can not record in FM, Aux mode and can't record Microphone's sound.
3. It's better to turn the Bluetooth devices volume to maximum during recording.
4. It will be stopped recording when pressing the mode button during recording.

SPECIFICATIONS

Power Output: 10W
Frequency Response for main speaker: 55Hz-20KHz
Power Supply: DC 5V

Input: DC 5V
Drivers: 8"Full Range
FM: 87.5~108.0 MHz
Battery Capacity: 1500mAh
Transmission Distance: 10m
Dimension: (WxHxD): 230x365x205mm