Sylvania SPA081-C - 8" Bluetooth Tailgate Speaker Manual

DEAR CUSTOMER
In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference.

NOTE
This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

Do's and Don'ts

• Do not play music at excessive levels as damage to hearing and / or equipment may result.
• Do not use outdoors in wet or in damp surroundings.

Packing list

Upon opening the package, please check for the following items:
1 x Speaker
1 x USB charging cable
1 x Instruction manual
1 x Wire Microphone

Specification

Input: DC 5V
Drivers: 8"Full Range
FM: 87.5~108.0 MHz
Battery Capacity: 1500mAh
Transmission Distance: 10m
Dimension: (WxHxD): 250x410x210mm

Product overview

1. LED Display
2. Power(OFF/ON)/VOLUME -&+
3. MIC input
4. USB JACK
5. AUX input
6. Previous track
7. Play/Pause&TWS (Wireless Bluetooth Connection: under Bluetooth mode, press TWS button for around 3 seconds to pairing another TWS speaker;
   Under FM mode, lightly press Play/Pause&TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
8. Next track
9. MODE/LED ON (Long press to turn on/off light; Lightly press to enter into selection for Bluetooth, FM Radio, AUX Input, USB)
10. DC interface (5V)
11. Charging Status
    RED = Charging
    Light off = Fully Charged

POWER SOURCE

1. Please charge the unit at least 4 hours before first time using.
2. Twist the dial clockwise/anticlockwise to switch on/off the unit.

CHARGE THE BATTERY

When the battery is charging, the CHARGE STATUS lights shows on the LED display is red. After the battery has fully charged, the light turns off.

1. Connect the USB charge cable to the DC5V interface of the speaker firmly.
2. When the battery is fully charged, please disconnect the USB charge cable from the speaker.
3. The speaker works normally when charging.

POWER/VOLUME

Twist the dial clockwise/anticlockwise to increase/decrease the volume.

PREVIOUS/NEXT BUTTON

Under playing status, press PREVIOUS/NEXT button to get back to a previous or next song.

PAUSE/PLAY BUTTON

To stop playing the current track, please press PAUSE/PLAY button on the control panel. Press it once again to continue playing.

MODE/LED ON

Long press to turn on/off light.

Lightly press to enter into playing mode selection(Bluetooth, FM Radio, AUX Input, USB).

AUX IN JACK

1. Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc, then select LINE by pressing the MODE/LED ON button on the control panel.
2. Play from an external audio device.

MIC IN JACK

Plug in microphone directly for playing.

USB JACK

Insert USB card directly for playing.

FM FUNCTION

Lightly press MODE/LED ON button to switch to FM mode, short press PLAY/PAUSE button on control panel for automatic searching and saving the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station.

Bluetooth

Short press MODE/LED on button from control panel to select Bluetooth mode.

Turn on the Bluetooth setting on your phone, tablet or any other Bluetooth enabled audio device and select "Syl SPA081"(no need to match code), the unit and device will then connected via Bluetooth. Press the "NEXT SONG" and "PREVIOUS SONG" button on the control panel to select the song, press " PLAY/PAUSE" button to control the playing status.

TWS: (True Wireless Speaker)

It needs two speakers to make a TWS. When you had two speakers, you can make a TWS as below steps:

1. Don't connect to this speaker with Bluetooth devices.
2. Turn on both speakers and press the mode button to change to Bluetooth mode.
3. Press and hold one speaker's play/pause button for 3 seconds and wait for both speakers to connect each other. It will have a tone coming out from these speakers after connected successfully.
4. Turn the Bluetooth devices to search the Bluetooth name "Syl SPA081" and tap to connect it. It will have a tone coming out from this speaker after connected successfully.
5. Now you can play the music form your Bluetooth devices.