Sylvania SP953 - Bluetooth Speaker Manual

Sylvania SP953 - Bluetooth Speaker Manual

Also See for SP953:

Advertisement

Sylvania SP953 - Bluetooth Speaker Manual

Introduction

Thank you for choosing the Sylvania SP953 Bluetooth Speaker as your source for entertainment! You can use this item with iPads, iPhones, iPods and many types of smartphone to stream music. In order to get the best results when using the device, please read this manual first before using.

Description

Overview of the device

Package Contents

  1. Bluetooth Speaker
  2. Micro USB Charging Cable
  3. User Manual

Features

  • Bluetooth – enables simple wireless pairing with your Bluetooth-enabled devices
  • 360-Degree sound with deep bass
  • Stylish rubberized design with carrying hook
  • Large control buttons for easy operation
  • 3.5mm standard auxiliary input provides a simple wired connection to wide variety of devices
  • Built-in rechargeable battery

Safety Instructions

  • Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
  • DO not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
  • Do not use the unit if it has been dropped or damaged in any way.
  • Repairs to electrical equipment should only be performed by a qualified electrician.
    Improper repairs may place the user at serious risk.
  • Do not use the unit with wet hands.
  • Do not put objects into any of the openings.
  • Keep the unit free from dust, lint, etc.
  • Do not use this unit for anything other than its intended use.
  • Keep the unit out of reach of children.
  • This product is not a toy.

INSTRUCTIONS FOR USE

Charging the Speaker

The speaker has built-in rechargeable battery. When the battery is drained out, speaker would turn OFF automatically. please recharge the battery every time it drains out.

Attach the Micro USB cable to the unit and plug into any USB charger. If the unit is completely discharged, it will take approximately 5 hours to fully charge at 5V/500mA.

The Red LED will illuminate during charging, when it has completed, the Red LED will turn off. There will be a beep when the battery is low and needs to be recharged.

Please charge it completely before the first-time use.

Operation

  • Press and Hold "ON/OFF" button 2 seconds to power ON, the Blue LED will start to flash.
  • If an Aux (3.5 mm) cable is connected to the unit, the Blue LED will turn off, and the Green LED will stay illuminated, notifying you, the unit is in Aux-In mode.
  • Press and Hold "ON/OFF" button 2 seconds to power OFF.

Bluetooth Mode

Pairing
The unit will go into "Pairing Mode" when the Bluetooth pairing button is pressed. Go into your Bluetooth device settings menu and look for "Sylvania SP953"
After the unit has paired and connected, it will re-connect automatically when the unit is powered on and the device is in range.

Note:
Bluetooth Timeout: 10 minutes. You can press and hold the Bluetooth pairing button to unpair your current device and search for new devices in Bluetooth mode.

Begin Streaming Music

  • Press Play/Pause button to start playing music
  • Press and Hold "+" button 2 seconds to play the next track
  • Press and Hold "-" button 2 seconds to play previous track
  • Press either "+" or "-" button for volume control

Note:
You will hear an audible alert when the maximum / minimum volume level has been reached.

Aux-In Mode

Plug in the supplied 3.5 mm cable into the unit. The other end is connected to your device. The Green LED will only illuminate when in "Aux" mode.

Please note music and volume can be controlled by your device.

LED Status

Blue LED flashing & Blue LED solid Bluetooth Mode
Green LED on solid Aux Mode
Red LED Charging
Red LED off Full charged

Troubleshooting

Unit doesn't connect to device Speaker needs to be connected/ re-paired to device
A tone is heard every few seconds Speaker needs to be charged
Unit will no power on Speaker needs to be charged
Unit doesn't control track(s)/volume Speaker needs to be in Bluetooth mode for full control
Unit distorts at high volume The devices' volume needs to be lowered

Care and Maintenance

Read the following recommendations before using the Bluetooth Speaker. Following these you will be able to enjoy the product for many years.

  • Do not expose the Bluetooth Speakers to liquid, moisture or humidity to avoid the product's internal circuit being affected.
  • Do not use abrasive cleaning solvents to clean the device.
  • Do not expose the device to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
  • Do not dispose of the device in a fire as it will result in an explosion.
  • Do not expose the device to contact with sharp objects as this will cause scratches and damage.
  • Do not let the device fall on the floor. The internal circuit might get damaged.
  • DO not attempt to disassemble the device as it may get damaged if you are not professional.

Specifications

Bluetooth specification Bluetooth 5.0 (A2DP, HFP, AVRCP)
Bluetooth Range 33ft (10m)
Charging input voltage DC 5V = 500mA
Built-ln Battery 1200mAh rechargeable lithium battery
Dimension 200mm x 78mm

Battery life & charging time may vary based on usage & types of devices used.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.

SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sylvania SP953 - Bluetooth Speaker Manual

Advertisement

Need Assistance?

Do you have a question about the SP953 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents