Calling / Connected Line Identification Presentation (Clip / Colp) - Panasonic KX-TD816NE Features Manual

1.1 General Features
Calling / Connected Line Identification
Presentation (CLIP / COLP)
Description
Calling Line Identification Presentation (CLIP) enables showing the calling party's number on
the display of the called party's telephone when a call is received.
Connected Line Identification Presentation (COLP) enables showing the called party's number
on the display of the calling party's telephone when the called party answers a call.
These features are one of ISDN's services.
To use the CLIP or COLP service, number assignments are required as follows:
• CLIP/COLP number for each outside line
• CLIP/COLP number for each extension
Conditions
• The CLIP service for outgoing outside calls can be restricted by System Programming
(CLIR: Calling Line Identification Restriction).
• The COLP service for incoming outside calls can be restricted by System Programming
(COLR: Connected Line Identification Restriction).
• The number actually sent to the calling or called party may be different from the system
programmed number. It depends on the contract with your ISDN supplier.
• It is possible to send the desired CLIP number for one time even if the CLIP number is not
assigned.
Programming Guide References
• [100] Flexible Numbering
• [419] Subscriber Number Assignment
• [516] Calling Line Identification Restriction
• [517] Connected Line Identification Restriction
• [623] CLIP / COLP Number Assignment for Extension
• [624] CLIP / COLP Number Assignment for ISDN Extension
• [632] CLIP / COLP Number Assignment for TD286 Extension
Features Guide References
• Caller ID to RS-232C Port
User Manual References
• 2.7.5 Displaying Your Number on the Called Party and Calling Party's Telephone
(Calling / Connected Line Identification Presentation [CLIP / COLP])
70 Features Guide