Parallelled Telephone - Panasonic KX-TD816NE Features Manual

1.1 General Features

Parallelled Telephone

Description
The proprietary telephone device can be connected in parallel with a single line telephone
(SLT).
When a parallel connection is made, an extension user can make and answer a call using either
telephone.
Conditions
• The proprietary telephone (PT) can be used to perform normal operations whether or not
the SLT is enabled.
• In the SLT + proprietary telephone (PT) combination, if one telephone goes off-hook while
the other telephone is on a call, the call is switched to the former.
• When receiving a call;
The SLT is enabled; Both the PT and the SLT ring except when the PT is in Handsfree
Answerback mode or Voice Alerting mode.
The SLT is disabled; PT rings but the SLT does not ring. However the SLT can answer the
phone.
• When the SLT is in operation, the display and LED indicator on the paired PT will show in
the same way as if the PT is in operation.
• If eXtra Device Port feature is available, each telephone can act as completely different
extension.
• Call Waiting tone can be heard only PT.
Installation Manual References
• 2.3.4 Parallelled Telephone Connection for a Proprietary Telephone and a Single Line
Telephone
Programming Guide References
• [005] Flexible CO Button Assignment
• [100] Flexible Numbering
Features Guide References
• EXtra Device Port (XDP)
User Manual References
• 2.7.12 Setting the Parallel Connected Telephone Ringer (Parallelled Telephone)
• 4.1.3 Customising the Buttons
182 Features Guide