Line Access, Automatic - Panasonic KX-TD816NE Features Manual

1.1 General Features

Line Access, Automatic

Description
Allows the extension user to dial the automatic line access number and access an idle line from
the CO line groups assigned for the extension. The proprietary telephone user can use the
Loop-CO button in place of the access number.
Conditions
• Each extension is subject to System Programming items for CO lines available to access.
• An idle CO line is selected from the CO line groups assigned to the station. If one CO line
group is available, an idle line is selected from that group. If multiple CO line groups are
available, the CO line group hunting sequence is determined by System Programming.
• This feature requires a CO button (G-CO, L-CO or S-CO) assignment on a proprietary
telephone (PT). Dialling the line access code selects a CO button on a PT according to the
priority:
S-CO > G-CO > L-CO on a hunted CO line group
• If Idle Line Preference - Outgoing is set on the telephone, the user can access an idle line
only by going off-hook.
• The system waits for a programmed time before dialling after a CO line is seized.
Programming Guide References
• [100] Flexible Numbering
• [103] Automatic Access CO Line Group Assignment
• [400] CO Line Connection Assignment
• [605-606] Outgoing Permitted CO Line Assignment — Day / Night
Features Guide References
• CO Line Connection Assignment - Outgoing
User Manual References
• 2.2.1 Basic Calling
146 Features Guide