Panasonic KX-TD816NE Features Manual page 268

2.2 DECT Portable Station Information for Other Sections
Title
Call Forwarding
Calling / Connected Line
Identification Presentation
(CLIP / COLP)
Charge Fee Reference
Class of Service (COS)
CO Incoming Call Info &
Display
Display, Call Information
CO Line Connection
Assignment - Outgoing
Conference
Data Line Security
Department Codes
Direct In Lines (DIL)
Do Not Disturb (DND)
268
• "FWD" is displayed as notification while on-hook.
• The FWD/DND button can be activated by selecting it on the
display. For details, refer to the 5.3.9 Selecting the Feature Button
on the Display in the User Manual.
• The FWD/DND button can be assigned on a flexible button.
However, the LED of the flexible button does not work.
• Program [673] PS CLIP / COLP Number Assignment, is required
to assign the CLIP / COLP numbers for each PS.
• The charge fee reference allowed for a PS is determined by
program [656] PS Charge Verification Assignment.
• Program [657] PS Class of Service, is required for assigning each
PS a Class of Service (COS).
• The display type for a PS when an incoming call is received can be
selected by program [676] PS Incoming Call Display. However, if
an incoming call is received using DIL 1:N, the display will only
show a CO line number.
• Program [661-662] PS Outgoing Permitted CO Line Assignment –
Day / Night, is used to determine the CO line which can be accessed
by a PS.
• The Conference button can be activated by selecting it on the
display. For details, refer to the 5.3.9 Selecting the Feature Button
on the Display in the User Manual.
• The Conference button can be assigned on a flexible button.
However, the LED of the flexible button does not work.
• Data Line Security for a PS can be set or canceled by program [668]
PS Data Line Security.
• Program [666] PS Department Codes, is used to assign the
department code on a PS basis.
• A PS can be assigned as the DIL 1:N destination. In this case,
program [659-660] PS DIL 1:N Extension – Day / Night, is
required.
• Intercept Routing applies to DIL 1:1. When the line is busy, the PS
is out of range or the PS power switch is OFF.
• "DND" is displayed as notification while on-hook.
• The FWD/DND button can be activated by selecting it on the
display. For details, refer to the 5.3.9 Selecting the Feature Button
on the Display in the User Manual.
• The FWD/DND button can be assigned on a flexible button.
However, the LED of the flexible button does not work.
PS Condition
Features Guide