Table of Contents
Advertisement
Dual Radiant Element
Dual Element can be operated using inner element only or
both elements.
To use inner element
1. Depress Element Size switch downward. Dual
Element switch is located in upper right corner of
control panel.
2. Push in and turn surface element control to desired
setting.
• Element will cycle on and off to maintain desired
heat setting.
3. When finished cooking turn control to OFF position.
To use both inner and outer element
1. Depress Element Size switch upward.
2. Follow steps 2-3 above.
Haloring
®
Element (ARH6710)
®
Haloring
element is able to provide constant non cycling
power. LO setting allows excellent simmer and keep
warm capabilities.
1. Push in and turn control knob to the desired setting.
• LO through 3 should be used for food that is
prepared at less than boiling temperatures or to
simmer. When using settings LO through 3 the
element will not be illuminated.
• 4 through 5 can be used to maintain boiling in
moderate amounts of liquid.
• 6 through 7 should be used to maintain boiling or
larger amounts of food, low temperature frying and
to maintain correct pressure in a pressure cooker.
• 7 through 9 can be used to fry meat and poultry or
to maintain deep-fat frying temperatures.
• HI should be used to bring food to boiling
temperatures. When food is boiling temperature
should be reduced to 4,5,6,7.
2. When finished cooking, turn control to OFF position.
11
Advertisement
Table of Contents
