Temperature; Select Temperature Unit; Minimum / Maximum Records; Reset System - Oregon Scientific RMR602A User Manual

TEMPERATURE

This product can display current, maximum, and
minimum temperature readings collected by the main
unit (indoor) and remote sensor (outdoor).
Outdoor temperature data collected by the remote
sensor is updated every 78 seconds.

SELECT TEMPERATURE UNIT

Press the °C / °F button to switch between temperature
units. The button is located in the battery compartment.

MINIMUM / MAXIMUM RECORDS

Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records.
To clear the records, press and hold MEM for 2 seconds.
The current temperature readings will be shown as the
minimum and maximum records.
RMR602A lab test R2

RESET SYSTEM

T h e R E S E T b u t t o n i s l o c a t e d i n t h e b a t t e r y
compartments for the main unit. Press RESET when
you change the batteries and whenever performance is
not behaving as expected (for example, unable to
establish radio frequency link with remote sensor or
radio-controlled clock).
NOTE
to default value, and you will lose all stored information.

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol
- free mild detergent. Avoid dropping the product or
placing it in a high-traffic location.
10
10
When you press RESET, all settings will return
1/17/04, 4:49 PM