Turn Atomic Clock On/Off; Set Clock; Switch Clock Display; Alarm - Oregon Scientific RMR602A User Manual

TURN ATOMIC CLOCK ON/OFF

Perform this step if you cannot receive Atomic Clock
signals. Press and hold DOWN for 2 seconds. Then,
manually set the clock following the "Set Clock"
instructions (below).
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF.

SET CLOCK

You only need to do this if you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).
1. Press and hold MODE for 2 seconds. The Clock
Area will blink.
2. Select the hour offset (-9 to +9), hour display format
(12 or 24 hour), hour, minute, year, month, day, and
language. Press UP or DOWN to change the setting.
Press MODE to confirm.
NOTE The language options are (D) German,
(E) English, (F) French, (I) Italian, and (S) Spanish.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Calendar and Clock
display with Hour Offset, Seconds, or Weekday.
RMR602A lab test R2

ALARM

This product has 2 alarms: a Single Alarm and a Weekday
Alarm. The Single Alarm can be set to go off at a specific
time for a one-time event (for example, if you are napping
on Saturday). The Weekday Alarm will sound at the same
time Monday - Friday (but not on weekends).

VIEW ALARM SETTINGS

Press ((.)) to display the Alarm settings you wish to view:

SET ALARM

1.
2.
3.

ACTIVATE ALARM

Press
indicates that the alarm is deactivated.

STOP ALARM

To stop the alarm from ringing, press ((.)).
9
9
Weekday or Single.
Press ((.)) to display the type of Alarm you wish to
set: Weekday or Single.
Press and hold ((.)) again for 2 seconds. The Alarm
settings will blink.
Select the hour and minute. Press UP or DOWN to
change settings. Press ((.)) to confirm.
or to activate or deactivate the Alarm. ---
1/17/04, 4:49 PM