Turning The Alarm On Or Off - Oregon Scientific RM806 User Manual

3) When the desired hour time is reached, press the ((•)) 24h
again.
4) The "Minutes" segment of the alarm time will begin flashing.
5) While the "Minutes" segment is flashing press the [+] button to set the
desired minute time.
6) When the desired minute time is reached press the ((•)) 24h
again to exit the alarm time set mode.
NOTE: As soon as any change in the alarm time is made the alarm icon ((•)) will
automatically appear indicating that the alarm is activated.
IMPORTANT: The Radio Controlled Clock will continue to display the "ALARM"
time until the ((•)) 24h
Date" display.

TURNING THE ALARM ON or OFF

To turn the alarm on or off simply press the
ON/OFF button is pressed once the alarm is activated (the bell icon [
appear on the display). The alarm is deactivated when the ON/OFF button is pressed
once and the bell icon [
When the crescendo alarm sounds, it may be turned off using one of the following
methods.
1) If the SNOOZE/LIGHT key is pressed within two minutes the Snooze is ac-
tivated and the alarm will sound again in 8 minutes.
2) If the ((•)) 24h
next day.
3) If the ON/OFF key is pressed, the alarm is deactivated and will not
sound again until it is activated.
IMFORTANT: If none of the above actions are taken, the alarm will automatically
snooze once, sound again in 8 minutes, and will not sound again until the next day.
OFF button is pressed once to return to the "Month/
] disappears from the display.
OFF key is pressed, the alarm will not sound again until the
8
ON/OFF key in any mode. When the
OFF button
OFF button
] will