Clock. The Projection Clock is a compact, easy-to-handle device. The RM868P — the Central Europe model — is designed to automatically synchronize its current time and date when brought within an approximate 1500km radius of the radio signal generated from Frankfurt, Germany (DCF77).
DISPLAY BUTTONS A DIGITAL CLOCK DISPLAY B ANALOG CLOCK DISPLAY CONTROL BUTTONS C [MODE/SET] BUTTON Changes the display mode or holds to enter the setting routine D [ALARM] BUTTON Manipulates the daily alarm function ] AND [ ] BUTTONS L 3 V DC JACK Change the value of a setting For AC power adapter installation ] BUTTON...
Page 3
HOW TO ACTIVATE THE BACK-LIGHT Press [ ] to turn on the back-light for 5 seconds. SNOOZE HOW TO USE THE CLOCK PROJECTION The clock projection makes it easier for you to read the Current time or Alarm time with alarm-on/off status at night. To use the feature, 1.
Press [MODE/SET] to display the following in sequence: Digital Analog HOW TO USE THE PROJECTOR 1) Current Time with Second WITH POWER ADAPTER ------------------------------------ RM868P/RM868PU comes with an AC power adapter. Use of the Calendar AC power adapter is required for continuous projection.
signal. After that, the periodical scanning will only take a few 2) Current Time with Weekday seconds. ------------------------------------ The antenna icon indicates the quality of reception. Calendar 3) Current Time with Weekday STRONG ------------------------------------ zone-time WEAK 4) 2 zone-time with Weekday NO RECEPTION ------------------------------------ zone-time Calendar...
Page 6
HOW TO ENABLE OR DISABLE AUTO-RECEPTION If you wish to disable the auto-reception of radio signal feature while the unit is within range, press and hold [ ] button for 2 seconds. The radio-reception icon on the will disappear and the unit will NOT respond to radio signals.
5. Use [ ] / [ ] to enter the minutes. The hand of minutes on Day-of-the-week the analog display will be adjusted simultaneously. Language Monday Tuesday Wed. Thursday Friday Saturday Sunday 6. Press [ALARM] . English The alarm will be automatically activated. The [ ] icon will appear.
SECTION 3 NOTES ON BACKLIGHT ADDITIONAL INFORMATION - The EL panel that provides illumination will lose power after extensive usage. - The unit may emit an audible sound whenever the display is illuminated by the EL backlight. This is due to vibration of the THE RESET BUTTON EL panel used for illumination and does not indicate malfunction of the unit.
R&TTE Compliance Note SPECIFICATIONS This device complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and Radio Control : Auto Synchronization of current that the following standard(s) has been applied: time and date Electromagnetic compatibility (Article 3.1.b of the R&TTE Calendar...