MAIN FEATURES Radio Controlled Projection Clock MODEL : RM813P / RM813PU (UK Version) Instruction Manual INTRODUCTION Congratulations on your purchase of the RF Projection Clock (RM813P/RM813PU). The RM813P/RM813PU is a multifunctional radio-controlled clock. It can automatically synchronize its current time and date...
A Two-line display ] button RESET Displays the current time and calendar or alarm time Resets the unit by returning all settings to factory default values ] Radio reception signal Indicates the condition of radio reception N Battery compartment Accommodates two (2) UM-3 or “AA” size batteries ] Alarm icon O Guiding light Appears when weekday alarm is activated...
RM813P/RM813PU comes with an AC power adapter. Use of the When the unit is receiving signal, the Radio Reception symbol AC power adapter is required for continuous time projection.
Page 4
3. Confirm the entry by pressing [MODE] and the 12- or 24-hour display format will blink. STRONG 4. Repeat (2) and confirm the entry by pressing [MODE]. WEAK 5. Repeat the above procedures to set the hour, minute, year, month, day and language for day-of-week. You can select among English (E), German (D), French (F), I (Italian) or NO RECEPTION Spanish (S).
Page 5
3. Enter the values by [ ] / [ ] buttons. 4. Confirm the entry by pressing [ 5. The minutes will blink. 6. Repeat (3) and (4) to finish the setting. The alarm will be activated automatically. Follow the same procedures to set and activate the Single and/or Weekday Alarm.
HOW TO USE THE GUIDING LIGHT RM813P/ RM813PU is equipped with a guiding light. To test the functionality of the guiding light or to turn it on temporarily, press 3. Then, remove the lightbulb by rotating it in a anti-clockwise the [TEST] button with a blunt stylus at the bottom of the unit.
6. To test if the guiding light is working properly, install batteries PRODUCT SPECIFICATIONS into the battery compartment and press the [TEST] button. The light should be turned on as long as the button is held. Operating Temperature : -5°C to 50°C 7.
Page 8
R&TTE Compliance Note This device complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and that the following standard(s) has been applied: Electromagnetic compatibility (Article 3.1.b of the R&TTE Directive) Applied standards ETS 300 683 : 1997 Efficient use of the radio frequency spectrum (Article 3.2 of the...