Replacing The Burner Parts - Fisher & Paykel OR90SCG6B1 Care & Cleaning

Freestanding cooker

Hide thumbs Also See for OR90SCG6B1:

Table of Contents

Burner Parts

• You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean spills regularly

before they become burnt on. Do not wash these parts in a dishwasher.

• After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.

• It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure

to do so can cause serious problems.

• Check that the ignitor is always clean to ensure trouble free sparking. It must be cleaned very carefully using a

toothbrush and methylated spirits.

To avoid damage to the electronic ignition, do not try to light a burner without all burner parts in

place.

Replacing the Burner Parts

• Carefully replace the burner parts as per the following illustrations.

• Fit the flame spreader to the housing as shown below. Make sure the burner is not able to rotate.

Check that:

• The ignitor is always clean to ensure trouble-free sparking.

• The probe is always clean to ensure correct operation of the safety valves.

• The flame spreaders are clean and the holes are not clogged.

https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SCG6B1/User_Guide_OR90SCG6B1/0...

Updated: Thu, 06 Apr 2023 10:59:08 GMT

Table of Contents