Fisher & Paykel OR90SCG6B1 Manual

Installing the Anti-Tip Bracket
• To restrain the cooker and prevent it tipping accidentally secure the cooker to the wall using the
• Before drilling and holes or inserting any screws into the floor or wall check that you will not
• When sliding the cooker back into place take care not to trap the power supply cable or gas
To Fit the Anti-tip Bracket
1. Loosely fix the anti-tip bracket to the wall using the supplied screws.
◦ Drill two 8mm diameter holes in the wall and insert the supplied plastic sleeve anchors before inserting the
screws.
2. Slide the cooker into place and adjust the height of the bracket so that it will align with the slot on the back of
the cooker.
3. Tighten the screws to fix the anti-tilt bracket in place.
4. Push the cooker back into place so that the bracket is fully inserted into the slot on the back of the cooker.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SCG6B1/Installation_Guide_OR90SCG...
supplied anti-tip bracket. If installing the cooker above a plinth (without fitting the adjustable feet)
revise the installation dimensions for the anti-tip bracket accordingly, considering that the feet
have the following measurements: min 85mm - max 133mm.
damage any wiring or pipes.
connection hose in the anti-tip bracket.
Updated: Thu, 06 Apr 2023 10:13:20 GMT
Powered by
1